Abaxis VetScan HM5 Quick Reference Manual

7, Changing the Reagent Pack-Caps Calibration should be performed when the quality control runs are showing values consistently out of range and it has been determined that the analyzer is not in need of cleaning and the quality control material itself is not degraded. Use only the …

6, 7. From the New QC Lot screen, select the method for entering the control target and ranges: • Enter Manually allows the user to type in the target and range values from the control package insert sheet. • Load from USB Drive allows the user to upload the values downloaded onto…

11, Deep Cleaning Cleaning & Maintenance Procedures This cleaning is meant to be used as an emergency procedure when a high HCT trend is noticed: and it is not part of the regularly scheduled maintenance. Please ensure that your HM5 is on software version 2.3 or higher. 1. Deep Cleaning. Go to …

12, Deep Cleaning Cleaning & Maintenance Procedures 2. Quality control. Go to Maintenance> Quality Control> QC Normal. Make sure the control has come to room temperature. Mix well by rolling the tube flat between your hands 10 times (A) and then slowly invert the tube 10-15 times (B). Run …

18, Abaxis, Inc. 3240 Whipple Road Union City, CA 94587 USA Tel +1 800 822 2947 Fax +1 510 441 6150 www.abaxis.com Abaxis and VetScan are registered trademarks of Abaxis, Inc. © Abaxis 2018. 790-7028 Rev. E 800 8…