virtual access GW-4000 Operation & User’s Manual

8, virtual access GW-4000 Configuring the Analog Modem Setting up and Configuring the Analog Modem © Virtual Access Ltd. Page 8 of 14 2.5.1 Setting up the analog modem for dial-out management Follow the steps described in section 2.3 to set up the modem for use as primary WAN interface, select call for permissions …

11, Configuring the Analog Modem Document Change Log © Virtual Access Ltd. Page 11 of 14 3.2 Call History Analog modem historical usage can be monitored using the Call History applet. On the SMG home page, select Status Æ Call History. Click the desired day and hour, or click zoom in if…

3, Configuring the Analog Modem Introduction © Virtual Access Ltd. Page 3 of 14 1.0 Introduction The Virtual Access Service Managed Gateway (SMG) GW-4000 and GW-5000 product range is optionally fitted with an analog modem. This document describes the configuration and use of …

7, Configuring the Analog Modem Setting up and Configuring the Analog Modem © Virtual Access Ltd. Page 7 of 14 Note: Although it is possible to configure more than one PPP interface for incoming calls, when a call comes in over the modem interface only the first compatible PPP interface w…

9, Configuring the Analog Modem Setting up and Configuring the Analog Modem © Virtual Access Ltd. Page 9 of 14 help fpga help memory help adsl help hub/ethernet help all or enter a letter followed by '*' for a search …

14, Configuring the Analog Modem Document Change Log © Virtual Access Ltd. Page 14 of 14 The following table lists all possible modem events: Severity Text Meaning INFO Dial (<called number>) Outgoing modem call in progress to called number INFO Incoming Ring Incoming ring signal …