ASROCK A75 Extreme6 Installation Manual

14, 14 1 Press any key (except for Ctrl-Y) to use the full portion of the logical drive for one logical drive. 2 Press Esc to exit to the Main Menu. Press Esc again to exit the Utility. 3 Press Y to restart the computer. You have successfully created a new RAID logical drive. N…

18, ASROCK A75 Extreme6 18 1.10 Viewing Controller Configuration From the Main Menu screen, press 4 to display the Controller Configuration Options screen. The Controller Configuration Options screen provides diagnostic information that might be helpful for troubleshooting purposes: …

5, 5 1.3 Installing Windows 7 / 7 64-bit / Vista / Vista 64-bit / XP / XP 64-bit With RAID Functions If you want to install Windows 7 / 7 64-bit / Vista / Vista 64-bit / 7 / 7 64-bit on a RAID disk composed of 2 or more SATA / SATAII / SATA3 HDDs with RAID functions, please f…

19, 19 1.11 Responding to Logical Problems While physical drives are highly reliable, on occasion a physical drive can fail. Fault-tolerant (RAID 1, 5, and 10) logical drives go Critical when a physical drive fails. Non-fault-tolerant (RAID 0 and JBOD) logical drives go Offline when a physic…

15, 15 4. Choose the RAID level and options for the second logical drive. Note that the physical drives on Ports 1 and 2 reflect smaller capacities because a portion of their original capacity belongs to the first logical drive. The physical drives on Ports 3 a…

11, 11 ٛ Erase Count. The default is 1. ٛ Erase Pattern The default is 55AA (hexadecimal) 5 Press Ctrl-E to continue. The confirmation screen displays. 6 Press Ctrl-P to secure erase your physical drive. Watch the screen to monitor the progress. Secure…