FXLuninaire Luxor Owner's Manual And Installation Instructions

17, 17 Operating the Luxor Controller Themes A theme is a planned set of groups at stated colors and intensities. A user can call up themes in the Program menu for quick setting of a series of groups, or in the Manual menu for on-demand control. Common uses for themes include location- based (e.g.,…

10, 10 Operating the Luxor Controller Activity Screen Aer ve minutes of inactivity, an Activity screen will appear on the LCD screen if the lights are running. The wait time is reduced to only ve seconds when the current screen is the Home screen. The Activity screen displays: • Cha…

20, 20 Operating the Luxor Controller Note Color and non-color LED boards must be assigned to dierent groups. Color Wheel The color wheel feature scans through all 300 hues constantly at intervals determined by the user. The scan is applied at the group level, allowing various gr…

19, 19 Operating the Luxor Controller Color The ZDC adds color to existing zoning and dimming options. A color system requires that a ZDC LED board is installed into each desired FX Luminaire LED xture. Standard and ZD- enabled FX Luminaire xtures will zone and zone/dim, respectively, b…

8, 8 Installing the Luxor Transformer Low-Voltage Cable Each low-voltage lighting cable consists of two parts. One part of the cable is designated to carry the voltage load and is referred to as the Common lead. The Common lead is installed into one of the two COM terminal blocks. Th…

15, FXLuninaire Luxor 15 Operating the Luxor Controller Note Only one xture can be addressed at a time. Attempting to address more than one xture at a time can result in assignment failures. Assigning Light Fixtures into Groups Figure 14: Fixture assignment wire diagram The lighting assignment …