HEIDENHAIN QUADRA-CHEK 2000 Operating Instructions Manual

341, File management | Viewing and opening files Opening and recreating a measurement report Measurement reports saved as *.xmr file type can be viewed or recreated. A new measurement report uses the template, the template settings, and the selected features for recreating. Tap File management in …

104, Commissioning | Steps for commissioning 7 Uploading license key from license file Tap Settings in the main menu Tap Service Open in the sequence Software options Activate options Tap Read license file Select the license file in the file system, on the USB mass storage device or on the network dri…

85, HEIDENHAIN QUADRA-CHEK 2000 Basic operation | Using the Inspector Control Function 1 2 3 45 Feature list The feature list lists all measured, constructed, or defined features. The feature list provides the following information: 1: Feature with symbol, name, and consecutive number 2: Function that was used…

9, Contents 10 Measuring......................................................................................................................................213 10.1 Overview...............................................................................................................................…

351, Settings | General Parameter Explanation Rounding method for linear values Rounding method for linear values Settings: Commercial: Decimal digits from 1 to 4 are rounded down, decimal digits from 5 to 9 are rounded up Round off: Decimal digits from 1 to 9 are rounded down Round up: Deci…

163, Setup | Single steps for setup Adjusting the threshold settings The threshold settings define the contrast value starting from which a light-to-dark transition is recognized as an edge. Adjust the threshold settings to the current light conditions via a teach sequence. To do so, use…