ASROCK Z68 EXTREME4 - Installation Manual

4, ASROCK Z68 EXTREME4 - 4 Intel Rapid Storage The Intel Rapid Storage technology supported allows you to create a RAID 0 and RAID 1 set using only two identical hard disk drives. The Intel Rapid Storage technology creates two partitions on each hard disk drive to create a virtual RAID 0 and RAID 1 sets. This techn…

5, 5 2.2 RAID Configurations Precautions 1. Please use two new drives if you are creating a RAID 0 (striping) array for performance. It is recommended to use two SATA drives of the same size. If you use two drives of different sizes, the smaller capacity hard disk will be the base storage si…

14, 14 Vo l u m e0 Press <Enter> under the Create Volume item. The utility prompts a confirmation message as below. Vo l u m e0 Press <Y> to complete the setup of RAID. After the completion, you will see the detailed information about the RAID that you set up. …

2, 2 1. Guide to SATA Hard Disks Installation 1.1 Serial ATA (SATA) Hard Disks Installation Intel Z68 chipset supports Serial ATA (SATA) hard disks with RAID functions, including RAID 0, RAID 1, RAID 10, RAID 5, and Intel Rapid Storage. Please read the RAID configurations in this gui…

13, 13 Vo l u m e0 If you selected RAID 0 (Stripe), use the up or down arrow keys to select the stripe size for your RAID 0 array then press <Enter>.The available values range from 8 KB to 128 KB. The default selection is 128 KB. The strip value should be chosen based on the planned drive usa…

6, 6 2.3.1 Installing Windows ® XP / XP 64-bit With RAID Functions If you want to install Windows ® XP / XP 64-bit on your SATA / SATAII / SATA3 HDDs with RAID functions, please follow below steps. STEP 1: Set up BIOS. A. Enter BIOS SETUP UTILITY Advanced screen Storage …