Hanna Instruments Edge Instruction Manual

46, Operational Guide 46 Steps To Optimize Steps to optimize measurement using an EC probe: 1. Determine what measurement you wish to make with the EC probe. 2. Determine if Standard or Basic mode is best for your measurement. 3. Connect the Probe and congure your measurement using the SETUP menu…

73, Hanna Instruments Edge Operational Guide 73 DO GLP Information The altitude and salinity setting at the moment of calibration together with the current reading. The time of the calibration together with the current reading. The date of the calibration together with the current reading Calibration Expiratio…

47, Operational Guide 47 Basic vs Standard EC mode EC Meter Conguration Measurement data can be logged using Manual Log on Demand or Manual Log on Stability or Interval Logging. The measurement logs may be exported to a thumb drive or PC. Standard Basic Measurement Conductivity,…

62, Operational Guide 62 Salinity Measurements (Not Available In Basic Mode) Press the RANGE key twice to switch from conductivity to the congured Salinity scale. Verify the desired scale is congured in SETUP. The meter supports three salinity scales: Practical Scale 1978, Percent Scal…

2, 2 Dear Customer Thank you for choosing a Hanna Instrument product. Please read this instruction manual carefully before using this instrument. This manual will provide you with the necessary information for correct use of this instrument, as well as a precise idea of its versatility. If you need…

76, Maintenance 76 Remove the protective cap of the pH electrode. DO NOT BE ALARMED IF SALT DEPOSITS ARE PRESENT. This is normal with electrodes. They will disappear when rinsed with water. During transport, tiny bubbles of air may form inside the glass bulb aecting proper functioning of…