ASROCK 775Twins-HDTV Manual To Installation And Configuration

14, STEP 7: Then you will see the following message: “Duplicate Data from M to m (Y/N) ?” that asks to do drive copy. The source drive is indicated by “M”, while the target drive is indicated by “m” in Drive Select Menu. Pressing <Y> will duplicate the data in source drive to th…

4, ASROCK 775Twins-HDTV 2. Guide to RAID Configurations (RAID 0 / RAID 1 / JBOD) 2.1 Introduction of RAID This motherboard adopts ALi M5283 IDE controller chip that supports RAID 0 / RAID 1 / JBOD function with two independent Serial ATA (SATA) channels. This section will introduce the basic know…

10, 2.4 RAID 1 Configuration This section will guide you to configure RAID 1. To set RAID 1 configuration, please follow the instruction below to use “ALi RAID BIOS Setup Utility” for the setting of RAID 1 configuration. STEP 1: Boot-up your computer. STEP 2: Press <Ctrl…

6, 2.3 RAID 0 Configuration This section will guide you to configure RAID 0. To set RAID 0 configuration, please follow the instruction below to use “ALi RAID BIOS Setup Utility” for the setting of RAID 0 configuration. STEP 1: Boot-up your computer. STEP 2: Press <Ctrl> a…

19, STEP 6: After the RAID drives are created, it will appear the following message “Input RAID name (8 characters): ” for you to key in a name for the newly created array. The effective characters for an array name are <0>-<9>, <A>-<Z>, <a>-<z>, <Space&…

2, 1. Guide to SATA Hard Disks Installation 1.1 Serial ATA (SATA) Hard Disks Installation This motherboard adopts ALi M5283 IDE controller chip that supports Serial ATA (SATA) hard disks. You may install SATA hard disks on this motherboard for internal storage devices. This section…