Hamilton Medical Hamilton-C1 Operator's Manual

230, 8-24 624326/03 8 Responding to alarms Ventilator outlet temperature high High priority. Measured inhalation temperature is too high. Check whether the room temperature exceeds the ventilator’s operating temperature limit. Have the ventilator serviced if temperature cannot be reduced. …

86, 2-38 624326/03 2 Preparing for ventilation To scroll through a list using the scroll bar or arrows, touch the scroll bar to select and activate it; or turn the P&T knob to select the scroll bar (it is framed in yellow) and then press it to activate your selection. Your selection turn…

297, Hamilton Medical Hamilton-C1 624326/03 A-25 A.10.1 Accuracy testing The ventilator’s parameter and measurement accuracy is tested using an IMT FlowAnalyser™. The tolerance intervals for the data generated by the FlowAnalyser are as specified below, and are included in the accuracy information provided in this…

112, 4-2 624326/03 4 Ventilator settings 4.1 Introduction CAUTION • To prevent possible patient injury, make sure the ventilator is set up for the appropriate patient group with the appropriate breathing circuit parts as described in Chapter 2. • To ensure the ventilator’s safe operation…

379, D APPENDIX 624326/03 D-1 NIV, noninvasive ventilation D.1 Introduction D-2 D.2 Benefits of noninvasive ventilation D-4 D.3 Required conditions for use D-4 D.4 Contraindications D-5 D.5 Potential adverse reactions D-5 D.6 Selecting a patient interface D-6 D.7 Control settings D-7 D.8 …

52, 2-4 624326/03 2 Preparing for ventilation • To prevent interrupted operation of the ventilator due to electromagnetic interference, avoid using it adjacent to or stacking other devices on it. If adjacent or stacked use is necessary, verify the ventilator’s normal operation in the configura…