ASROCK 880GM-LE FX Operation & User’s Manual

19, 1919 1919 19 3. Boot your system. Press <F2> or <Del> to enter BIOS setup. Enter “Share Memory” option to adjust the memory capability to [32MB], [64MB], [128MB] [256MB] or [512MB] to enable the function of D-sub. Please make sure that the value you select is less than t…

31, 3131 3131 31 Caution 1. Without SATA 15-pin power connector interface, the SATA / SATAII Hot Plug cannot be processed. 2. Even some SATA / SATAII HDDs provide both SATA 15-pin power connector and IDE 1x4-pin conventional power connector interfaces, the IDE 1x4-pin convention…

6, 66 66 6 1.21.2 1.21.2 1.2 SpecificationsSpecifications SpecificationsSpecifications Specifications Platform - Micro ATX Form Factor: 9.6-in x 7.8-in, 24.4 cm x 19.8 cm - Solid Capacitor for CPU power CPU - Support for Socket AM3+ processors - Support for Socket AM3 processors: A…

52, ASROCK 880GM-LE FX 5252 5252 52 Parallel Port Address Use this item to set the address for the onboard parallel port or disable it. Configuration options: [Disabled], [378], and [278]. Parallel Port Mode Use this item to set the operation mode of the parallel port. The default value is [ECP+EPP]. If this opti…

36, 3636 3636 36 Using SATA / SATAII HDDs without NCQ and Hot Plug functions (IDE mode) STEP 1: Set up BIOS. A. Enter BIOS SETUP UTILITY Advanced screen Storage Configuration. B. Set the “SATA Operation Mode” option to [IDE]. STEP 2: Install Windows ® XP / XP 64-bit OS on your system.…

9, 99 99 9 4. Due to the operating system limitation, the actual memory size may be less than 4GB for the reservation for system usage under Windows ® 7 / Vista TM / XP. For Windows ® OS with 64-bit CPU, there is no such limitation. 5. The maximum shared memory size is defined by the ch…