illumina iSeq 100 System Manual

36, illumina iSeq 100 The run name can contain alphanumeric characters, hyphens, and underscores. 2 For Read Type, select one of the following options: u Single Read—Perform one sequencing read, which is the faster, simpler option. u Paired End—Perform two sequencing reads, which generates higher-quality data a…

18, Chapter 2 Getting Started First Time Setup 11 Minimize the Control Software 11 Run Settings 12 Instrument Customization 14 Network Setup 15 User-Supplied Consumables and Equipment 17 First Time Setup The first time the system is turned on, the control software is launched with a series of scre…

64, Ship the System 1 If it was removed, place the protective foam base into the bottom of the brown shipping box. 2 Lift the white box by the handles (a two-person lift is recommended), and then lower the white box into the brown box. Any orientation is acceptable. CAUTION The white…

63, 6 Place the square foam over the instrument so that the thinner sides of the foam rest on the front and back of the instrument. Make sure that the foam is flush with the top of the box. 7 Close the front flap, and then close the top of the box. Package the Reusable Test Components 1 Put the…

5, Document Date Description of Change Document # 1000000036024 v01 May 2018 Added the following miscellaneous instructions: • Performing validation runs. • Creating a sample sheet when sequencing in Manual mode. • Minimizing the control software to access other applications. Ad…

49, Base Dye in First Image Dye in Second Image Conclusion From Compared Images T On On Clusters that show intensity in both images are T bases. A On Off Clusters that show intensity in the first image only are A bases. C Off On Clusters that show intensity in the second image only are C bases.…