Lang ET-PFD350 Installation Manual

1, Important safety notice Product description Installing the projector in the frame Securing the projector in the frame Installing tandem projections Maximum stacking information Adjustment options Dimensions & weight ET-PFD350 INSTALLATION MANUAL 2 3 4 5 6 6 7 8…

3, PRODUCT DESCRIPTION Frame Used for projector installation. Screws and washers Used for securing the projector into the frame. For tandem assemblies, another separate frame is required. Flat washers (M6) x 14 Screws (M6x20) x 7 Purpose Finished assembly diagramImage/DrawingParts name 3. Safety U…

8, DIMENSIONS & WEIGHT 8. 339.6 mm / 13.37 inches 235 mm / 9.25 inches 651.75 mm / 25.65 inches 630 mm / 24.80 inches 683 mm / 26.88 inches Weight: 11,00kg …

6, INSTALLING TANDEM PROJECTIONS MAXIMUM STACKING INFORMATION Place the upper framed projector on top of the lower framed projector. Make sure the four male location bolts enter into the correspondent female location bolts. To secure, draw the locking pin through both bolts. locking pin ceil…

7, Lang ET-PFD350 7. Using the adjusting screws to the left and right you can adjust the position of the projector by approximately ve degrees. You can lower or lift the front left or right corner. By turning the single round adjustment screw, placed on the side of the frame, you can move the back of the projec…