Kanomax 3522 Operation Manual

28, 10. Troubleshooting Please review the following troubleshooting tips before requesting a repair. Symptom Possible Cause Solution Battery completely discharged. Turn OFF the power and charge the battery. Display does not appear when turning on the power. (No display on the Screen.) …

3, Caution * Do not drop or hit the instrument. …… Dropping or hitting the instrument may cause damage or malfunction. * Never disassemble, modify or repair the instrument. …… Failure to observe the above may cause short circuit and malfunction. * Do not clog the…

11, 4.2 Removal and Installation of Cleaning Device 1) Hold the cleaning device, and slide the lock away from the cleaning device as shown below. Cleaning device Cleaning device lock Rechargeable battery pack 2) After the lock is released, remove the cleaning device by hol…

9, Kanomax 3522 3. Battery Charge 3.1 AC/DC Adapter For prolonged measurements, the instrument should be powered using the supplied AC/DC adapter where AC100-240V power is available. Insert the adapter jack into the adapter socket of the instrument first, and then to a power outlet. …

14, 4.5 Cleaning the Sensor First, confirm that the high voltage is turned OFF. Then align the front end of the cleaning device with the cleaning port, and slowly insert the cleaning device with the sponge side facing down. The cleaning device must be inserted up to the scale line indicated on…