Intelligent Telematics IT1000 Technical Maintenance Manual

3, 3 How to Replace SD Card Important Notes: • Please ensure that the vehicle ignition is turned off before continuing • If you are reusing an SD card from another IT1000 please ensure that the SD card has been reformatted via your PC. The SD Card can be replaced while still co…

9, 9 Explanation of LED Light Status When the device first boots, the LEDs may do some odd patterns but after a 30seconds to a minute this will settle down into the correct LED pattern (Pattern Below). If the device doesn’t then there is something wrong, check LED patterns Above. …

7, Intelligent Telematics IT1000 7 How to Replace Adjustable Bracket Important Notes: • Please ensure that the vehicle ignition is turned off before continuing. Step 1) Turn engine on and place the heating on full and onto the windscreen, place the adjustable mount tape side down onto the windscre…

8, 8 Basic Fault Diagnostics The easiest way to diagnose a camera fault is via the VTS server. The server will list camera faults such as an offline device or SD card issues. If a camera is showing as offline there could be a few causes to this: • Low voltage (This could pos…

4, 4 How to Replace SIM Card Important Notes: • Please ensure that the vehicle ignition is turned off before continuing The SIM Card can be replaced while still connected to the vehicle there is no need to unplug the camera. Steps: Step 1) Use a 2.5mm Allen key to release the tab at…