K-Drill Ice Auger Owner's Manual

1, K-Drill Ice Auger 1 Owner’s Manual Please read this manual and follow its instructions carefully. The words WARNING, CAUTION, and IMPORTANT carry special meanings and should be carefully reviewed. WARNING - Failure to read, understand and follow all warnings and instructions listed could result in s…

4, 4 IMPORTANT: At no time is it safe to insert the K-drill into the chuck and pow- er-up the drill to tighten it onto the shaft. The same also holds true of removing the K-drill from the chuck. Do it manually for your own safety and the safety of others. If necessary set the dri…

3, 3 Owner’s Manual IMPORTANT - At the end of the ice shing season, before storing for summer, please spray WD-40 on the blades. This simple maintenance prevents rusting during storage. Also, K-Drill offers free blade sharpening. See page 9 for details. CAUTION - Always p…

5, 5 Owner’s Manual Redrilling of Holes in the Ice Before explaining how to re-drill an old hole you must rst understand how an existing hole refreezes. 1) It will begin refreezing from the top and outside edges 2) As it continues to freeze, the ice will continue thickening in from the sid…

8, 8 Replacing the Blades WARNING – Blades are sharp! Use leather gloves when handling blades. 1) Set the drill to neutral or remove the battery from the drill for your own safety. 2) Remove the center tip blade with 3/16” Allen wrench. 3) Remove the outside chipper blades with 7/16” open end…

12, 12 Hoody Sweatshirt Our charcoal K-drill hoodies are denitely one of the heaviest and warmest hoodies around. • Sueded 70% cotton & 30% polyester eece • Rib knit side gussets, cuffs and waist • Key pocket inside pouch • 1/4 zip collar with YKK zipper • Super-thic…