Instantel Micromate Owner's Manual

132, 124 Micromate Operator Manual – 721U0201 Revision 6 16. MAINTENANCE The Micromate does not contain any user serviceable parts, other than what has been listed below, and therefore is not to be opened. Any attempt to open the unit, geophone or microphone will void any and all…

17, Micromate Operator Manual – 721U0201 Revision 6 9 If the linear microphone sensor check fails a failure message will appear in the microphone channel. Sensor Check – Microphone Failing The most common reason for a failed linear microphone sensor check i…

129, Micromate Operator Manual – 721U0201 Revision 6 121 calibration report. If the Micromate is being returned for its annual calibration an As Found report will also be generated. The As Found report will follow the same procedure as above except no adjustments will be made. …

33, Micromate Operator Manual – 721U0201 Revision 6 25 The most common reason for the microphone to fail the sensor check is an improper connection. Ensure the microphone is attached to the proper connector and the cable has not been damaged. Failing Microphone Sen…

116, Instantel Micromate 108 Micromate Operator Manual – 721U0201 Revision 6 Sample Waveform Printout - Continued Compliance Graph …

70, 62 Micromate Operator Manual – 721U0201 Revision 6 11.1.6. Sample Rate This is the number of samples the Micromate will read from the analog to digital (A/D) converter each second while it is in monitor mode. The higher the sample rate the better the resolution when reproducing the wa…