INHECO DWP Operation & User’s Manual

36, INHECO 35 Doc ID: 900434-001 March 2018 10  10.1. Power Supply The Power Supplies are not delivered together with each system. They must be ordered separately at INHECO as for stacked incubators a Power Supply is not necessary. Only the maste…

24, INHECO 23 Doc ID: 900434-001 March 2018 5     A technical skilled integrator has to install and integrate the Incubator. For questions regarding the local computer settings contact your system administr…

32, INHECO 31 Doc ID: 900434-001 March 2018 7.10. Assembling the transportation lock The transportation lock is needed for Incubator Shaker transports to avoid damage to the shaker mount. NOTE - Turning the unit upside down might require a renewal of the shaker drive. - Do Not …

27, INHECO 26 Doc ID: 900434-001 March 2018 6.2.   The LED indicates the status of the module: - Power on and device is initialised >> LED blinking slow - Firmware download >> LED is blinking (ca. 3-5 Hz) - USB-Communication not present >>…

22, INHECO DWP INHECO 21 Doc ID: 900434-001 March 2018 NOTE It is possible to connect several devices on top of the master device. The maximum number of devices is shown in the Technical Data. Each device can be stacked on top of one incubator and connected corresponding to gure 16 → Tec…

13, INHECO 12 Doc ID: 900434-001 March 2018 2.6.        Parameter Value Amplitude range 0.0 – 3.0 mm* Speed range 6.6 – 30.0 Hz* Speed precision ±2 Hz Load 40 – 250g* (weig…