M2 2M HO LOOP Manual 

1, M2 Antenna Systems, Inc. 4402 N. Selland Ave. Fresno, CA 93722 Tel: (559) 432-8873 Fax: (559) 432-3059 Web: www.m2inc.com ©2018 M2 Antenna Systems Incorporated 7/16/18 REV A M2 Antenna Systems, Inc. Model No: 2M HO LOOP Model ......................................... 2M HO LO…

2, 1.Insert the 1/4-20 x 1/4" set screws a few threads into the two connector blocks. Use the 1/8" Allen wrench provided. Insert the 1/4-20 x 1/4" set screws a few threads into the ends of the shorting bar. 2. Refer to the HO-LOOP ASSEMBLY SHEET and insert the tubes into the two c…

4, 2M HO LOOP STACK KIT Mount both antennas with no phasing cables installed. Make sure the feed connectors are facing each other and the larg- er feed blocks are on the opposite side on each anten- na. (2M and 222 only). Creating a 180°phase shift. Connect your feedline to the top…

5, M2 2M HO LOOP MOUNTING & OPTIONAL KITS UNIVERSAL MAST BRACKET KIT (PT# FGMASTBRKTKIT) SIDE MOUNT OR TOPMOUNT BIG FOOT MAG MOUNT (PT# FGBIGFOOT) HO LOOP MAG KIT (PT# FGHOMAGKIT) …

6, 4402 N. Selland Ave, Fresno CA 93722 (559) 432-8873 FAX (559) 432-3059 www.m2inc.com Email: [email protected] HO LOOP, STANDARD PARTS LIST DESCRIPTION QTY H.O. LOOP HALF 2 H.O. FEED ASSEMBLY WITH SO-239 CONN 1 H.O. SHORTING BAR 1 S…