Laguna Tools Laser MX Owner's Manual

15, 2. Setup 15 2. Setup CO2 Laser Machine © 2018 Laguna Tools 8/27/2018 EN Laser Tube (height) Adjustment Notice In our quality and testing facility, the tube is mounted and the laser machine mirrors are aligned accordingly. The laser tube is then removed and put back in the original p…

2, Laguna Tools Laser MX The information contained in this publication was correct at the time of print. In the interest of continuous innovation, we reserve the right to change specifications, design or included equipment without notice or obligation. No part of this publication may be reproduced, transmitted, …

27, The information contained in this publication was correct at the time of print. In the interest of continuous innovation, we reserve the right to change specifications, design or included equipment without notice or obligation. No part of this publication may be reproduced, transmit…

23, A1. Parameters 23 A1. Parameters CO2 Laser Machine © 2018 Laguna Tools 8/27/2018 EN 40 Watt 60 Watt 80 Watt 120 Watt Cut with the grain when possible. Consider that the density and water content of the wood will play a role in the above parameters. Do not process woods with flammable surface…

1, Owner's Manual X|Series C02 Laser Precision CO2 Laser Engraving & Cutting Machine 8/27/2018 EN 2072 Alton Parkway Irvine, CA 92606 U.S.A. Service: +1 (949) 474-1200 or email [email protected] CO2 Laser Machine © 2018 Laguna Tools 8/27/2018 MCNCLTLCO2MU2012-40W, MC…