Hotraco agri EMEC-12 Manual 

1, 1 MANUAL EMEC-12 Egg-counter EMEC-12/E/01 February 2013 …

2, Hotraco agri EMEC-12 2 3. Installation on a conveyor In order to achieve the best accuracy, the egg-counter should be mounted at a place where the eggs are not rolling or shifting on the conveyor. Also, some conveyors move backwards after the drive motor turns off. Th…

3, 3 4. Maintenance Under normal conditions the egg-counter should require very little maintenance. In most cases, if properly installed, the infrared sensors stay relatively clean underneath. If dust or dirt does tend to build up on the sensors, it should…

4, 4 Sometimes the system on which the egg counters are installed has a different earthing than the panel. As a result the CAN-Bus communication can be disturbed. In the worst case one or more involved circuit boards can be damaged. To prevent this, connect the panel and the…

5, 5 6. Wiring diagram 1 2 3 4 5 6 7 8 9 10 ON 1 3 5 2 4 6 ON 1 3 52 4 6 ON 1 3 52 4 6 CON2 CON2 CON2 CON3 CON3 CON3 CON1 CON1 CON5 CON1 EGG EGG EGG SW1 SW1 SW1 Error Error E…