I.O.T. BWC-I2 Operation & User’s Manual

1, I.O.T. BWC-I2 User Manual for BWC-I2 Preface Thank you for purchasing the Body worn camera! Please carefully read this manual before using it, and keep this manual safe for future reference. Some functions of this camera need to be enabled by using combination key, so it is suggested to carefull…

2, Structural Diagram Front 1. Charge indicator 2. IR light 3. Recorder Mic 4. Multi-functional button 5. Playback button 6. ON/OFF button 7. Data interface 8. Working indicator 9. Intercom Mic 10. HDMI port 11. USB port Back 12. External camera …

3, Basic Operations 1. Turning On the Camera In power off status, long press for 3 seconds, after a beep, the camera will be turn on and then go to the preview mode. Meanwhile, the status indicator will turn green. In preview mode, the following screen will appear: 2. …

4, 5. One Touch Snapshot In power off status, long press , after a beep, the camera will be turn on, and there is a crack sound and a photo will be taken, and the photo will be saved in JPG format automatically. 6. Recording Video In preview mode, press , after a beep, this camera will…

5, Auto mode: in preview mode or during recording a video, when the ambient brightness is not good, it will automatically turn on IR function; and when the brightness is good, it will automatically turn off. 11. Playback In the preview mode, press key to enter into playback interfa…

6, The functional menus are described as follow: 1. V ideo resolution; 2. Photo Pixel; 3. Burst shoot; 4. Video quality; 5. Pre-recording; 6 . P ost-recording; 7. Video loop; 8. Video clip; 9. IR auto switch; 10. Motion detection; 11. Screen off; 12. Auto power off; 13. Voice broadcast;14…