InWin IW-RN224-03 Operation & User’s Manual

24, 21 4.2.3 System Monitoring To monitor the enclosure sensor status, such as temperature and DC power amplitude, type command “sys” in the UART. …

20, InWin IW-RN224-03 17 3 Backplane Introduction Location Description CN01-CN12 SAS Receptacle Connector (SAS 12Gb/s 3.5" HDD Connector) Dxx1 HDD Power LED Dxx2 HDD Access/Fault LED CNE1 Primary SAS Expander Slot CNE2 Secondary SAS Expander Slot FPC1 Front Switch …

4, 1 PREFACE Thank you for choosing the InWin IW-RN224-03. This manual is written for system technicians who are responsible for installation, troubleshooting, managing and repairing this server chassis. This document provides the overview of all the features of the chassis…

16, 13 2.6.2 Connecting LEDs, Front Control Panel and Front USB Refer to your motherboard user guide for pin functions and locations, then plug the connectors to the pins on the motherboard to activate the functions. Connector Name Abbreviation Color Front I/O In…

5, 2 Electrostatic discharge (ESD) and ESD protection: In most cases, ESD may damage disk drives, electronic boards and other parts. We recommend that you conduct installation only at an ESD free space. If not possible, perform ESD protection protocol by wearing an anti-static wrist/an…