horsch Maestro 16 SW Operating Instructions Manual

73, 68 69 Adjusting the sealing lip NOTE A defective sealing lip or incorrectly assembled supporting plate cause metering errors during sowing. ¾ The sealing lip must not be torn or dam- aged - replace the sealing lip at least 1 x per year. ¾ Insert the side cover with the sealing lip into …

18, Retrots Structural changes not approved by HORSCH may aect the functionality and operational safety of the machine and will void any warranty claim. HORSCH is not liable for damages to life and limb as well as property damages resulting from unapproved retrotting and…

115, Optional equipment Micro-granulate facility SW The micro-granulate facility is used to place additional granulate, e.g. pesticides or fertiliser, into the seed furrow. A variant for placement on the seed furrow is not possible for technical reasons (transport height). The facility c…

101, Reminder every 20 hours In order to avoid faults caused by soiled sensors in the downpipes and an impairment of the seed placement, the note “Clean downpipes every day and check function of trap rollers” will be displayed after 20 operating hours when switch- ing on the next…

7, horsch Maestro 16 SW Single grain metering ................................. 78 Single grain metering unit ............................. 79 Overview .................................................... 79 Components in the metering unit ............... 81 Adjusting the metering unit ........................89 Checks ..…

71, MF 67 Rotors A large number of rotors is available for the dif- ferent seed types with numerous geometrical shapes and grain sizes, as well as fertilisers in form of powders or granulates. Rotor with special properties are also available for fertiliser, ne and coarse seeds…