Keiser M SERIES Assembly And Operation Manual

16, M3i | M3 TOTAL BODY TRAINER 16 BACKLIGHT SENSOR While the computer is awake, the backlight sensor automatically detects ambient light levels in the room and turns on the backlight display when needed. RPM (CADENCE) The RPM displays the revolutions per minute of the crank arm—also k…

9, M3i | M3 TOTAL BODY TRAINER 09 Place all parts in a cleared area check for missing parts. Refer to the Parts and Hardware & Fittings sections for itemized lists (pages 7 and 8). Position the TBT shipping box in a cleared area. Pry up the top ap and tear down along a cor…

21, M3i | M3 TOTAL BODY TRAINER 21 Every Workout • TBT is properly stabilized, level to the oor (refer to “Base Stabilizer” section, page 14). • Check that parts most susceptible to wear are not damaged or broken (Adjustment Knob, L-Handle, and Seat Upholstery). • Cleaning: Target ar…

24, M3i | M3 TOTAL BODY TRAINER KEISER CORPORATION 2470 S. Cherry Ave. Fresno, CA 93706 CUSTOMER SUPPORT If you have any questions regarding the TBT assembly, installation, or operation after reading this manual, contact Keiser Customer Support: 555513_D 1 559 256 8000 [email protected] keise…

20, Keiser M SERIES M3i | M3 TOTAL BODY TRAINER 20 REMEMBER: • Combine resistance and intensity, along with varied time durations, for your desired cardiovascular, strength, and power conditioning. • Take the time to pedal during cool down, and stretch after your workout. • M3i Users — Download workou…

15, M3i | M3 TOTAL BODY TRAINER 15 RESISTANCE LEVER EMERGENCY BRAKE SEAT HEIGHT ADJUSTMENT KNOB SEAT DEPTH ADJUSTMENT L-HANDLE FLYWHEEL AND FIXED GEAR SYSTEM Resistance is controlled by the Resistance Lever. The Resistance Lever can be set to any gear from 1 to 24. The higher the gear number setting,…