Kitsound EXERT SPORTS Operation & User’s Manual

3, 4 5 Instructions for use Charging the battery 1. Connect the Micro USB charging cable to the Micro USB charging port (5) and plug into a power source 2. The LED indicator (6) will be red whilst charging, and nish after around 2–3 hours. Once fully charged, the LED indicat…

6, 10 11 [...continued] Removable earcups 3. You can then hand wash the earcups with soap. Please do not use bleach 4. Leave the earcups to dry naturally, do not tumble dry. When the earcups have dried, re–insert the plastic backing making sure it is the right way up according to the …

5, 8 9 Removable earcups Please do not wash the earcups in a washing machine. The removable earcups are hand wash only. Washing the earcups: 1. Gently remove the earcup by pulling it away from the headband at the groove where the material meets the plastic 2. Once removed – take out th…

9, Kitsound EXERT SPORTS 16 17 Troubleshooting • If you cannot connect the headphones to your device, please try the following: – Ensure that the headphones are charged, switched on, paired with and connected to your device – Check the headphones are within 10 metres (30 feet) of your device and that there a…

4, 6 7 [...continued] Re–pairing or pairing new devices 1. Make sure you have turned o the Bluetooth on any previously paired devices 2. Follow the ‘Pairing a Bluetooth device’ instructions from step 1 Call handling Answer a call Press MFB (2) to answer call End call Press…