Matrix Appliances MS200 Manual For Installation, Use And Maintenance

14, 14 Replacing the appliance door • Hold the door to the appliance in the closed position and manoeuvre the hinges so that the part of the hinge, highlighted by the star in fig. 3, inserts into the hinge slot in the cavity frame. • Next, ensure the notch on the underside of the …

10, 10 elapses, the oven will switch the set function off and an acoustic signal will sound to alert the user. To switch on semi-automatic cooking • Set the desired oven function and temperature. • Press the menu sensor until the display illuminates the ( ) symbol and the timer display …

19, 19 How to install your oven You will need the housing area in fig. 10 to fit your oven correctly. The oven is designed to fit into a cabinet of 600mm width. The oven can be built in or built under the kitchen units, but you must ensure that it is properly ventilated. In the diagram b…

24, For our Customer Care Department, or for Service, please contact us on: Serviced by The CDA Group Ltd. Harby Road, Langar, Nottinghamshire, NG13 9HY Tel: 01949 862012 Fax: 01949 862003 Email: [email protected] …

12, Matrix Appliances MS200 12 Cleaning and maintenance Keeping your oven clean and well maintained helps to prolong the fault-free lifespan of it. It is important that, before any cleaning or maintenance is performed, you switch off the oven at the mains supply. Do not start any cleaning or maintenance until the ove…

3, 3 Parts intended to come into contact with food conform to 1935/2004/ EC. IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EU DIRECTIVE 2012/19/EU. At the end of its working life, the product must be taken to a special local authority waste collection cen…