Mamas & Papas Pliko combination Manual 

6, CHASSIS OR PUSHCHAIR MODE – 11 – Once all of the assembly has been completed the chassis can be combined with the Navetta Carrycot (see pages 28 to 29 for fitting instructions) or the Primo Viaggio Car Seat (see pages 26 to 27 for fitting instructions). The chassis can also be converted into a p…

5, – 8 – – 9 – FITTING THE CUP HOLDER Continue to push the cup holder down onto the attachment point until it ‘clicks’ into position. Never place items weighing more than 0.5 Kg (1lbs) in the cup holder. Click It is danger ous to place hot drinks in the cup holder . Never hang addit…

10, – 19 – OPERATING THE BRAKES USING THE RIDE-ON PLATE The rear ride-on plate can be used to carry an additional child on. The maximum weight for a child on the ride-on plate is 20 kg (upto a maximum age of 4 years approximatly). Before using the ride-on plate the hood must be removed and the back…

4, ATTACHING THE WHEELS Check that the pins in the pushchairs legs are protruding through the wheel housings. Check the wheels are correctly fitted by trying to pull them off again. – 6 – Attaching the front wheels: Slot the two front wheels onto the ends of the pushchairs front legs. Push th…

15, Removing the carrycot: Grip the centre of the carrying handle with one hand. With the other hand, slide the locking handle (positioned on the foot end of the carrycot) horizontally and then upwards and hold. Still holding the lock up, lift the carrycot clear of the pushchair. Once the carryco…

13, Mamas & Papas Pliko combination – 25 –– 24 – Slot the apron behind the bumper bar as shown in the diagram. ATTACHING THE NAVETTA APRON TO THE PUSHCHAIR Fasten the zip on the bottom edge of the apron to the zip on the front edge of the footrest cover. Pull the top of the apron down over the bumper bar and fasten t…