Levante ECOPANELS500 Operation Manual

4, levante-products.com LEV0549/Page 4 of 8/Issue 1/07.18 CONTROLS 1 - Programming Button 2 - Timer Button 3 - Up button 4 - Down Button 5 - ON/OFF Button 6 - Temperature Sensor PROG + TIME 6 1 2 3 4 5 Digital Display 1 - General When first powering the heater, you will hear a beepi…

5, levante-products.com LEV0549/Page 5 of 8/Issue 1/07.18 CONTROLS 4 - Programs The function module is equipped with an accurate thermal cut-out when the programmed temperature is achieved. It has a built in memory with 6 heating programs, of which 5 are pre-defined as “P1,P2,P3,P4,P5” a…

6, levante-products.com LEV0549/Page 6 of 8/Issue 1/07.18 CONTROLS 4.1 - Setting the Chosen Program To select a program: Press the “Prog” Button on the side of the heater. The current selected program will be displayed; Press “+” or “-” to scroll through the available programs until you…

8, levante-products.com LEV0549/Page 8 of 8/Issue 1/07.18 LIMITED WARRANTY This product has been made under strictest quality control procedures to ensure good performance and reliability. This product has a warranty against defects in materials and workmanship for 12 months fr…

7, Levante ECOPANELS500 levante-products.com LEV0549/Page 7 of 8/Issue 1/07.18 CONTROLS 6 - LED Light 15 seconds no operation, LED light will be decreased by half; Or press “PROG”+” TIME” buttons at the same time for 3 seconds, LED light will be shut off. 7 - Open Window Function Press “+” and �…