KMC Controls SimplyVAV BAC-8001 Installation Manual

14, KMC Controls SimplyVAV BAC-8001 BAC-8001 and BAC-8201 VAV Controllers Installing the controllers Connecting to an MS/TP network 14 Note The MS/TP terminals are labeled -A, +B and S. The S terminal is provided as a connecting point for the shield. The terminal is not connected to the ground of the controller. When connecting to c…

5, BAC-8001 and BAC-8201 VAV Controllers About the controllers Specifications 5 Regulatory UL 916 Energy Management Equipment FCC Class B, Part 15, Subpart B BACnet Testing Laboratory listed as an application specific controller (ASC). UL 864 smoke controls (BAC-8201 only) Installation Supply voltage…

6, About the controllers Specifications 6 Dimensions Table 1-1 BAC-8000 dimensions ABCD EFG 6.53 in.4.89 in.4.25 in.0.77 in.6.00 in.2.14 in.1.92 in. 166 mm 124 mm 108 mm 19 mm 152 mm 54 mm 49 mm A B D G F E C …

7, About the controllers Safety considerations 7 Safety considerations Danger Danger represents the most severe hazard alert. Bodily harm or death will occur if danger guidelines are not followed. Warning Warning represents hazards that could result in severe injury or death. Caution C…

13, Installing the controllers Connecting to an MS/TP network 13 Connecting to an MS/TP network The BAC-8000 series controllers are BACnet MS/TP compliant controllers. Connect them only to a BACnet MS/TP network. See Application Note AN0404A, Planning BACnet Networks for additional inform…