Kitsound Hive 2 Operation & User’s Manual

1, Kitsound Hive 2 USER MANUAL JB. 5614-a / KSHIVE 2 / Made in China. © KitSound™ 2017. Christchurch, Dorset, BH23 4FL, UK All trademarks are acknowledged as the property of their respective owners. Unless otherwise stated their use does not imply that the trademark owner is aliated with KitSound or endors…

4, 6 7 Pairing a wireless device Using NFC With the Hive 2 turned o: 1. Press and hold Power (5) for 5 seconds 2. The LED indicator (2) will ash blue for 10 seconds, then rapidly ash blue to indicate it is in pairing mode 3. Turn on your iOS, Android, or Windows device’s Bluetooth…

2, 2 3 Please read this manual carefully before use. Box contents • KS Hive 2 • Micro USB charge cable • 3.5 mm aux cable • Carry bag • User manual Functions 1. MFB (multi-function button) 2. LED indicator 3. Volume –/Previous track 4. Volume +/Next track 5. Power 6…

3, 4 5 Battery protection mode – If you haven’t used the speaker for 90 days, the speaker will switch to battery protection mode automatically – To keep the rechargeable battery in good condition, please discharge and recharge speaker every 3 months, especially if you are not using t…

8, 14 15 We apologise for any inconvenience caused by minor inconsistencies in these instructions, which may occur as a result of product improvement and development. The use and operation of this speaker is beyond our control. Warranty of the Hive 2 is limited to defects caused b…

5, 8 9 Playing audio wirelessly 1. Follow the instructions in the ‘Pairing a wireless device’ section 2. Use the controls on your device to select content 3. Audio played through the connected wireless device will now be heard through the Hive 2 4. To play or pause the selected track, use th…