HUBBELL LIGHTING CX Operation & User’s Manual

38, HUBBELL LIGHTING CX 38 At 8:00PM the time schedule will turn the lights off, with a priority of LOW, releasing control of the relay to other inputs. The wall switch will now perform both ON and OFF commands until the next masking period starts at 7:00AM. Example 3: The project has an indoor photocel…

32, 32 Dimming In the Main Menu scroll down to Dimming and press the ENTER key. Once in the DIMMING menu there are four choices. Demand Response - Congures the Demand Response settings. Dimmers – Congures the dimmer outputs. Dimmer Inputs – Congures dimmer inputs Power-on Setti…

25, 25 Inputs Inputs allow for the mapping of connected low voltage devices or outside contact closures to relays or groups. CX Panels allow for inputs to be dened as any type of device. The input types are assignable to be “Switch,” “Motion,” or “Photocell”. Any Input,…

22, 22 Schedules – Days of the Week 1. Select Times: [CHANGE]. Then press the ENTER key. 2. In the SCHEDULE ON/OFF TIMES screen, use the right and left arrow keys to change Days of week. There are three Days of week selections; <Mon-Fri>, <M-F + Sat> and <Full Week> a. <M…

10, 10 Color LCD Display – Allows for most programming to be completed in a single screen. Right side scroll bars appear when more choices are available than are currently visible. Function Keys – These keys provide programming choices in various screens. Key labels appear o…

19, 19 Example How Scenarios Work For this exercise we will be demonstrating the Scenario steps to achieve manual ON/ automatic OFF for a room with a motion sensor and a switch. • From the Main Menu, select Scenarios >Factory Defaults. Then press ENTER. • Use the Up/Down arrow to choos…