Maeda MC-305C-2 Operation Manual

8, 0-6 ITEM Page SEARCHER HOOK 8- 1 1. SEARCHER HOOK EACH SECTION 8- 2 2. MOMENT LIMITER DISPLAY UNIT 8- 4 3. OPERATION 8- 6 4. INSPECTION AND MAINTENANCE 8- 8 4.1 LEGAL INSPECTION 8- 8 4.2 CONSUMABLES 8- 8 4.3 INSPECTION AND MAINTENANCE LIST 8- 8 4.4 MAINTENANCE…

224, 4-36 8.10 MAINTENANCE EVERY 1000 HOURS Perform this maintenance in tandem with maintenance every 30/50/250/500 hours. [1] REPLACEMENT AIR CLEANER ELEMENT Do not clean and replace the air cleaner when the engine is in rotation. Potential damage to the engine may occur if disregarded. C…

22, 1-14 [4] OUTRIGGER MINIMUM EXTENSION • Make sure all the outriggers are extended before performing crane operation. Crane operation is allowed only when all the outriggers are placed properly. Potential overturning of the machine may occur that leads to serious personal inju…

289, Maeda MC-305C-2 6-45 8.3.3 HOOK RAISING AND LOWERING • In the event of “Over-hoist alarming” or “Automatic cut out” during the hook raising operation, immediately suspend winding. Otherwise, it may cause a damege to the Crane, or the wire-rope is broken which result dropping of the hook or laod;…

265, 6-21 [1] LCD SCREEN CONTRAST RATIO CAUTION The LCD screen may be illegible when it is set too light or too dark, which may prevent correct operations. Adjust its contrast adequately for comfortable read. Adjust the contrast ratio of the LCD screen: 1. Shift the cursor ( or )…

110, 3-44 [2] CHECKING/REFILLING OIL LEVEL IN ENGINE OIL PAN Securely install the oil level gauge and filler cap after checking the oil level and refilling with the oil. If the oil level gauge falls during the operation, the hot oil spouts out of the pan, causing burns. CAUTION • See “Main…