Kongskilde FCT 1260 Operator's Manual

62, 4. SETTINGS PIGB-206B-02 FCT 1260-1460 0218 - 62 - GRINDING Adjustment of the PTO drive shaft for the rotor to or from grinding position respectively must only take place when the tractor and the machine have been stopped and the rotor has come …

85, Kongskilde FCT 1260 6. OPERATION IN THE FIELD PIGB-206B-02 FCT 1260-1460 0218 - 85 - Fig. 6-10 2) The forage harvester is now working in a semi-offset position, as the tractor is being driven with one set of wheels between the swaths. This technique results in an even row line, and is suit…

82, 6. OPERATION IN THE FIELD PIGB-206B-02 FCT 1260-1460 0218 - 82 - BLOCKAGES IN THE MACHINE Auger and feed intake section: In cases where a blockage in the auger or feed intake section is established, place the system in the neutral position and reduce the RPM. This stops…

111, 12. MISCELLANEOUS PIGB-206B-02 FCT 1260-1460 0218 - 111 - 12. MISCELLANEOUS HYDRAULIC DIAGRAM, FCT 1260 PR11-1760 V0 V1 C1: Turn drawbar C2: PU lift V2 V3 C3: Deflector up/down M1: Swivel chute w. brake V4 V5 V6 (NC) V10 V11 Neutral Reverse C4: Intake …

34, 2. CONNECTING TO THE TRACTOR PIGB-206B-02 FCT 1260-1460 0218 - 34 - FRICTION CLUTCH There is an integral friction clutch on the PTO drive shaft between the drawbar and the gearbox, which ensures that the machine is not overloaded during operation. The clutch must be…