LOOP OPTi Manual 

7
8
2
6
1
5
3
4
9
11
18
19
28
17
12
16
13
20
21
22
26
29
32
31
30
27
24
23
28
25
34
33
1.  Drag knob
2.  Locking screw M3x5
3.  Drag knob nut
4. O-ring 
5.  Nut washer
6.  Click bush
7.  Click pin
8.  Click spring
9.  Stop pin
10. -
11. Housing
12. Foot
13.  Foot screw
14. -
15. - 
16.  Seal ring
17.  Ball bearing
18.  Steel plate
19.  Ball bearing
20.  One way clutch ass'y
21.  Carbon plate
22.  Bearing holder 
23.  Cup spring
24.  Draw bar
25. Spool
26.  Spool cap o-ring
27.  Spool cap
28.  Handle rivet, balance screw
29.  Handle rivet
30.  Handle knob washer
31.  Handle knob
32.  Handle knob screw
33. Balance
34.  Balance o-ring
LOOP OPTi Fly Reel Manual
Congratulations on the purchase of your new flyreel. We wish you many seasons of good use of 
your new reel in flyfishing. Enclosed are instructions for proper care and maintenance. Good luck! 
 
Conversion left / right hand retrieve: 
1.  Remove spoolcap (27).
2.  Pull spool (25) straight out.
3.  Release stopscrews (2) ½ turn with enclosed Allen wrench.
4.  Pull drag knob (1) straight out.
5.  Remove drag knob nut (3).
6.  Pull draw bar (24) straight out, together with cup springs (23).
7.  Pull bearing holder (22) straight from shaft (15).
8.  Remove seal ring (16).
9.  Remove bearing (17), bearing washers (18), carbon plates (21) and one way bearing (20).
10.  Turn one way bearing (20).
11.  Wipe clean.
12.  Assemble the reverse way.
Adjust the effect of the brake:
The drag knob nut (3) allows you to adjust 
the brake, in order to obtain the lowest brake 
effect of preference. We recommend free 
spool in both directions.
1.  Turn the adjustment screw (3) until 
the lowest preferred brake effect has been 
obtained. 
2.  Fasten the drag nob to the ajdustment 
screw and turn the handle counter clockwise 
so that the heel on the inside of the drag nob 
(36) will settle to the left of the stop pin (9). 
Tighten the screws on the lock with the Allen 
wrench.
9
3
36
For more info on Loop fly tackle and accessories: www.looptackle.se
Maintenance of the reel:
• This reel is contructed so that maintenance is kept to a minimum. However, be sure to check 
on the level of grease on the O-ring (26) inside the spool cap (27), after using the reel for 
some time. We recommend Molykote 111C grease or similar.
• Put grease on locking screws #2 and the threads on drag knob #1 before use in saltwater.
• Rinse reel after use in saltwater. Do not remove the spool, water may penetrate the drag 
system.
• After fishing or when stored, make sure to release the pressure on the drag system.
Caution! Do not touch any moving parts of the reel when a fish is running.

• 
  Stardom SR3610 Series

  Stardom Guide Storage SR3610 Series (#S38382)

  SR3610 Series, 18, stardom/sr3610-series.pdf

• 
  RSQ RW-4002U

  RSQ Instruction: RW-4002U (#M17V35)

  RW-4002U, 7, rsq/rw-4002u.pdf

• 
  Crown II

  Crown Tutorial: II (#12A3FE)

  II, 1, crown/ii.pdf

• 
  Weslo Cadence Dl40 WLTL51691

  Weslo Guide: Cadence Dl40 WLTL51691 (#3JX5U8)

  Cadence Dl40 WLTL51691, 18, weslo/cadence-dl40-wltl51691.pdf

• 
  Celsi ELECTRIFLAME XD CESLGDRE

  Celsi User Guide Stove ELECTRIFLAME XD CESLGDRE (#4O9D94)

  ELECTRIFLAME XD CESLGDRE, 6, celsi/electriflame-xd-ceslgdre.pdf

• 
  Toshiba RAS-10GK Series

  Air Conditioner RAS-10GK Series Instruction, #E4Y5GP

  RAS-10GK Series, 6, toshiba/ras-10gk-series.pdf

• 
  Vizio VX42L HDTV10A

  Vizio Guidance LCD TV VX42L HDTV10A (#486PTC)

  VX42L HDTV10A, 98, vizio/vx42l-hdtv10a.pdf

• 
  Philips 221P3LPEB/00

  Monitor 221P3LPEB/00 Reference Book, #B389R8

  221P3LPEB/00, 47, philips/221p3lpeb-00.pdf

• 
  Pantech Pursuit II

  Pantech Cell Phone Manual (#4FAU9U)

  Pursuit II, 90, pantech/pursuit-ii.pdf

• 
  Asaklitt CB-32A

  Asaklitt Guidance: CB-32A (#IJ1OMX)

  CB-32A, 5, asaklitt/cb-32a.pdf

• Search YouTube Videos for LOOP OPTi Device
• Search Google for LOOP OPTi Information
• Search Photo of LOOP OPTi in Google Images
• Search Twitter for LOOP OPTi News