MedLux Wall GPI Installation Manual

4, 4 3.2 SYSTEM COMPONENTS - SUPPLIED The following components are included in the MedLux® GPI system purchased: • Class 2 rated LED Power Supply(ies) • MedLux® GPI Light Box • “Z” Bar Mounting Bracket(s) • Power Feed Cable(s) • Optional Seismic Ev…

10, 10 5.5.3 Lift evenly from both ends of the light box until it clears the “Z” bar supports attached to the wall behind the box. 5.5.4 Proceed to 5.4.1 6.0 SITE CLEAN-UP Ensure that all packaging materials, screws, tools, etc. are disposed of properly. 7.0 APPENDICES …

7, MedLux Wall GPI 7 5.2 GRAPHIC PANEL INSTALLATION In some cases, the graphic panel(s) may be supplied and installed by the customer. See cover of this manual for an example of a typical panel installed. The instructions that follow will detail the installation process. Contact with any…

11, 11 7.2 WIRING DIAGRAM Legal notices Copyright © 2017 Everbrite, LLC. All rights reserved. Everbrite and MedLux ® logos are trademarks or registered trademarks of Everbrite, LLC. Reproduction, transfer, distribution, or storage of part or all of the contents in this…

6, 6 5.0 INSTALLATION 5.1 THE GPI POWER SUPPLY Figure 1: GPIw Power Supply (Non-MRI version) The power supply converts incoming electrical power down to 48 volts DC. Mount the GPI Power Supply(ies) according to the approved system layout documentation. The power …

5, 5 4.0 PRE-INSTALLATION 4.1 PRODUCT RECEIPT AND INSPECTION Upon delivery, immediately uncrate the MedLux® GPI product. Inspect the product to ensure that nothing is damaged and that all components have been received. Immediately notify the Freight Company of any damaged components.…