Neets OsCar Installation Manual

6, Neets OsCar Page 6 of 12 Quick guide to the OsCar Buttons, indicators and connectors are available on the front and rear panels. These are shown below: Front: Number: Description 1 Push buttons for controlling the AV setup 2 Red LED lights for indication of AV setup status 3 Front cover with label for button…

7, Page 7 of 12 Installation The OsCar can be installed in standard electrical back boxes or by using mounting brackets. Each model (DK, EU) ts in typical boxes matching specic installation requirements for the country of sale. 1. Prepare the installation site by installing th…

2, Page 2 of 12 Foreword The purpose of this document is to describe how to install and configure the Neets Control – OsCar DK and EU models. COPYRIGHT - All information contained in this manual is the intellectual property of and copyrighted material of Neets. All rights are rese…

3, Page 3 of 12 Important Safety Instructions Caution: Read these instructions: Read and understand all safety and operating instructions before using the equipment. Keep these Instructions: The safety instructions should be kept for future reference. Heed all Warnings: Follow all warnings an…

10, Page 10 of 12 IR/RS-232 port The OsCar has 1 port (TX/IR) which can be configured (in software) either as RS-232 or as IR emitter. The RS-232 port is used for one- or two-way communication. A two way port is used for devices where reply commands is used. Connect the OsCar as …