Nedap Convexs Series Installation Manual And User's Manual

16, © Nedap N.V. Nedap Readers Installation Guide Page 16 of 21 5. Convexs/Invexs LED and Beeper control The Convexs/Invexs has three LED’s (red, green and blue) and a buzzer to give additional information to the user. At the backside of the Convex…

7, Nedap Convexs Series © Nedap N.V. Nedap Readers Installation Guide Page 7 of 21 2. Cards read by Convexs/Invexs The Convexs/Invexs is capable of reading different card credentials simultaneously. The letter stands for the card credentials: • M : Mifare …

13, © Nedap N.V. Nedap Readers Installation Guide Page 13 of 21 R G ND UL*/NA* / BEEP 4. Convexs/Invexs connections The Convexs/Invexs is not hot-swappable, so when making or changing connections be sure power is Off. General: - Check corresponding d…

18, © Nedap N.V. Nedap Readers Installation Guide Page 18 of 21 Remark: If the Configuration file is uploaded as above to the Convexs/Invexs, no checks are made if this configuration file is suitable for this Convexs/Invexs. This is in contradiction with…

20, © Nedap N.V. Nedap Readers Installation Guide Page 20 of 21 So if using the Convexs/Invexs with e.g. RS485 it can be connected to AEOS version before 2.2.0 or 2.1.7. If the configuration of the Convexs/Invexs differs from default this configuration must be l…

10, © Nedap N.V. Nedap Readers Installation Guide Page 10 of 21 The Wiegand output can be used to connect to Third party systems or to the AEOS APx003 readers with the appropriate Wiegand protocol. At AEreco the output format must be conf…