Lockly SECURE Installation Manual

14, Lockly SECURE 6.3 O 3x LK Pull the cable from the exterior lock through the rectangular hole underneath the positioning rods and square rod. Secure the hole above the square rod with Part O screw. O Screw O Screw 6.4 Remove the position rods (Part V) and replace them with Part O screws. Tighte…

4, STEP 1: PREPARING THE DOOR 1.1 If you are installing the Lockly Secure smart lock on an existing door, please remove existing door hardware and latch or bolts before installing the new lock. You can remove most existing door locks with a screwdriver. If you are having problems removing your ex…

10, Changing the Interior Handle Orientation Remove the screw by turning counter clockwise and rotate the handle 180 ° in the direction of the arrow as shown. 3.6 Securely screw clockwise as shown to complete your handle orientation change. 3.7 …

12, Exterior STEP 5: INSTALLING THE LOCK (EXTERIOR) Install the exterior lock as shown to the left by aligning the lock straight and passing the cable and attached rods through the lockset. 5.2 Pass the square rod (Part C) through the center of the lockset, and the round rods through the …

2, INSTALLATION OVERVIEW & PARTS LIST Exterior T O 3x G 4x P 3x D S LK N Q F H I M C B U A 3M TAPE PM5X25mm, Door thickness 1-19/50"~1-69/100"(35~43mm) PM5X35mm, Door thickness1-69/100"~1-97/100"(43~50mm) M1 M2 *NOTE: You can either use T or U to stabilize the ex…