LMI PW5 Instruction Manual

1, LMI PW5 1 Replaces same of Rev. Q 7/09 1615.R 7/2010 For le reference, please record the following data: Model No: Serial No: Installation Date: Installation Location: When ordering replacement parts for your LMI Metering Pump or Accessory, please include complete Model Number and Serial Number of …

3, 3 Contents 1.0 Introduction .........................................................................................4 1.1 Spare Parts ..............................................................................4 2.0 Unpacking Check List ..............................................…

41, 41 SOLUTION 1. Turn on pump/plug in pump. 2. Always prime pump with speed at 80% and stroke at 100%. 3. Foot Valve must be vertical (see Foot Valve Installation, Section 4.6). 4. Maximum suction lift is 5 ft (1.5 m). Pumps with High Viscosity Liquid Handling Assemblies re…

6, 6 2.0 Unpacking Check List Your carton will contain many or all of the following items. Please notify the carrier immediately if there are any signs of damage to the pump or its parts. Please refer to the enclosed Instruction Supplement for an illustration and electrical diagram of your complet…

34, 34 CAUTION ! If the liquid cannot be pumped due to Liquifram ™ rupture using protective clothing, gloves and face shield, carefully disconnect the suction and discharge tubing. Remove the four screws to the head and immerse the head in water or other neutralizing solution. 2. Start the pump…