NavePoint 6U Manual, Instructions

1, www.NavePoint.com [email protected] © 2017 NavePoint, LLC Pro Series Hardware: M6 NutM5 Screw M3.5 ScrewM6 Screw H-1 H-2 H-3 H-4 Cabinet Size 6U 9U 12U 15U 18U M6 Screw 28 28 28 32 32 M6 Nut 4 4 4 4 4 M5 Screw 18 18 18 18 18 M3.5 Screw 10 10 10 10 10 Tools needed: allen wrench …

2, NavePoint 6U 1 M6 2 M5 3 M6 Start with a Side Frame (A) lay at with slotted rails upright. Place Mounting Rail (C) at desired depth. Secure it in place with M6 screws (H1) and M6 cage nuts (H4). Repeat on other side frame. Attach the four Horizontal Structure Bars (D) to the Side Frames (…

3, 4 M3.5 5 6 Attach Back Panel (H) to the rear of the cabinet frame,using M3.5 screws (H3). Click Side Panels (E) into place. To install the Tempered Glass Door (G), locate the side with two pins. Insert the xed pin into door hinge hole. With your thumb, pull down on the spring pin and s…

4, To install locks on the Side Panels (E) push out plastic plugs. Unscrew the latch and washer using a phillips screwdriver and place to the side. Next unscrew the large hex washer and at washer and place to the side. Push lock through door and then replace all parts on the door. Once all pieces …

5, 1 2 M3.5 3 4 Wall Mounting Secure Hanger Bar (I) to wall with anchors and screws (not included). Click Side Panels (E) into place. Lift the cabinet up and slide onto Hanger Bar (I) hooks. Take two M3.5 screws (H3) and secure the cabinet to the hanger bar tightly. To install the Tempered…