Specifications:1389/1389838-pxie8840_quadcore.pdf file (17 Oct 2023)
|
National Instruments PXIe-8840 Quad-Core Controller PDF Operation & User’s Manual (Updated: Tuesday 17th of October 2023 02:50:05 AM)
Rating: 4.8 (rated by 65 users)
Compatible devices: NI ISM-7401, DAQ-STC Series, IC-317 Series, sbRIO-9605, IC-3173, cRIO-9075, GPIB-110, cRIO-9064.
Recommended Documentation:
10, • Hardware Prefetcher—This setting enables or disables CPU cache hardware prefetching. The default value is Disabled when booting LabVIEW Real-Time and Enabled when booting other OSs. Enabling hardware prefetching can increase system performance for some applications, but can cause control algo…
34, GPIB (IEEE 488.2) The following figure shows the location and pinouts for the GPIB connector on the NI PXIe-8840 Quad-Core. The following table lists and describes the GPIB connector signals. National Instruments provides a GPIB mating connector, part number 183285-0R2. Figure 10. GPIB…
11, ExpressCard Configuration Submenu Note This submenu is available on the NI PXIe-8840 Quad-Core ExpressCard variant only. Use this submenu to apply alternate settings to the ExpressCard configuration. These settings determine how much memory space, I/O space, and PCI bus numbers are pre-allocated f…
28, Figure 5. DisplayPort Connector Location and Pinout 1 19 20 2 Table 1. DisplayPort Connector Signals Pin Signal Name 1 ML_Lane0(p) 2 GND 3 ML_Lane0(n) 4 ML_Lane1(p) 5 GND 6 ML_Lane1(n) 7 ML_Lane2(p) 8 GND 9 ML_Lane2(n) 10 ML_Lane3(p) 11 GND 12 ML_Lane3(n) 13 CONFIG1 14 CONFIG…
32, National Instruments PXIe-8840 Quad-Core Figure 8. USB Connector Location and Pinout USB 2.0 4 1 9 5 4 1 USB 3.0 The following table lists and describes the USB 2.0 connector signals. Table 5. USB 2.0 Connector Signals Pin Signal Name Signal Description 1 VCC Cable Power (+5 V) 2 -Data USB Data - 3 +Data USB Data + 4 GND Ground …
9, SATA Configuration Submenu Use this submenu to apply alternate settings to the hard disk drive (HDD) interfaces. Normally, you do not need to modify these settings, as the factory default settings provide the most compatible and optimal configuration possible. • SATA Controller—Th…
Guide (ENCORE R, #V3J3DD)
ENCORE R, 118, alto/encore-r.pdf
Iso-Tech Multimeter Manual (#48BD2C)
IDM 203 RMS, 24, iso-tech/idm-203-rms.pdf
Hot Tub Handbook #2C3735
MILLENNIUM 8 AI8mIl7272, 1, aquatic/millennium-8-ai8mil7272.pdf
Lawn and Garden Equipment Document #Z58RL4
2X 524 SWE, 28, cub-cadet/2x-524-swe.pdf
Culligan Handbook: 2001 Gold Series (#2Z6196)
2001 Gold Series, 22, culligan/2001-gold-series.pdf
Camera Accessories Instruction #WOC183
MYW-CA, 2, aiphone/myw-ca.pdf
Lionel Toy Manual (#FO9EM3)
Powered F3 B-Unit Diesel Locomotive, 17, lionel/powered-f3-b-unit-diesel-locomotive.pdf
MM710M Microphone - #S523GW
MM710M, 2, micro/mm710m.pdf
wheeler Document Bicycle city/trekking (#A8ML19)
city/trekking, 68, wheeler/city-trekking.pdf
#5V2L83: MSLDCBB Tutorial
MSLDCBB, 24, liftmaster/msldcbb.pdf
+0.00 +0.00+13.49 +22.73CCM SCCM MENUPSIA ~C SETPT0.00A irMass FlowSCCM+0.00+0.00 +0.00+13.49 +22.73CCM SCCM MENUPSIA ¤C SETPT0.00A irMass FlowSCCM+0.00I/O Port(shape varies)DCInI/O Port(shape varies)DCInLightSwitchMountingHolesControlsFlowBodyValveProcess ConnectionsDisplayMass Flow ...
Model & Doc Type: Alicat Scientific MC 2
GB30 200 832 - 3Wireless actuator for shading elements and roller shuttersFSB71-24V DCSwitch actuator for shading elements and roller shutters for one 24V DC motor. 1+1 NO contact 4A/24V DC, not potential free. Encrypted wireless, bidirectional wireless and repeater function are switchable. ...
Model & Doc Type: FSB71-24V DC 4
Blinds and switch actuator RMG 8, blinds actuator JMG 4 and switch actuator module RME 8 - EIB theben As of: Apr-06 (Subject to change without notice) Page 1 of 36 RMG 8 Switch Actuator RME 8 / RMX 4 Switch Actuator Modules JMG 4 Blinds Actuator (for JMG 4 refer to Chapter 1.3) ...
Model & Doc Type: RMG 8 36
MECHA E1 C1 v0.2.1 © Nodal Ninja All rights reserved 1 ________________________________________________________________________________________________________________________ E1 Rotator + Single Axis Controller C1 QUICK REFERENCE ...
Model & Doc Type: Fanotec Mecha E1 10
# | Brand | Model | Document Type/File | Pages | File Size | Last Checked |
---|---|---|---|---|---|---|
1 | Woodward | ProAct II |
18 | 27/01 | ||
2 | Johnson Controls | SE-ZEC510-1 |
19 | 03/02 | ||
3 | Carrier | 42C Series |
114 | 3.16 Mb | 25/03 | |
4 | Simrad | IS40 |
19 | 29/03 | ||
5 | PIETRO FIORENTINI | REVAL 182 |
84 | 14/11 | ||
6 | Omron | R88M-1M10030S |
52 | 16/02 | ||
7 | PIETRO FIORENTINI | REFLUX 819 |
87 | 18/04 | ||
8 | Nice | ROBO PLUS |
76 | 02/02 | ||
9 | Elvox | EI20 |
20 | 10/01 | ||
10 | Novy | 906.270 |
16 | 16/11 |
# | Brand | Model | Document (PDF) | Pages | Size | Check Date |
---|---|---|---|---|---|---|
1 | Toshiba | 32AV50U |
2 | 0.5 Mb | 18.02.2024 | |
2 | Cornelius | ENDURO 250 |
14 | 0.43 Mb | 17.01.2024 | |
3 | Simrad | EQ 55 |
154 | 15.01.2024 | ||
4 | Barazza | 1CI120 |
8 | 14.02.2024 | ||
5 | Sony | SRS-X55 |
2 | 19.04.2024 | ||
6 | HP | Z240 Small Form Factor |
60 | 22.03.2024 | ||
7 | AT&T | 5140T |
99 | 21.12.2023 | ||
8 | AEMC | PEL 105 |
104 | 08.04.2024 | ||
9 | DeWalt | DC411-XE |
24 | 1.9 Mb | 28.11.2023 | |
10 | NCR | 7409-K330 |
6 | 09.01.2024 |