NatComm DMS Operation & User’s Manual

12, Page 12 National Communications MESSAGE ON HOLD OPERATION Once Power is connected and an SD card with both MP3 files is inserted into its Flash Card slot, DMS will begin supplying your MESSAGE ON HOLD message to your Telephone System. It will play the Announcement Message first (once only) befor…

13, National Communications Page 13 PLAYBACK CHECK OPTION DMS can be OPTIONALLY fitted with an Internal Speaker which is used as part of our Play Back Check facility. When this option is fitted, DMS outputs it’s Audio Message to the Telephone System, via the LIU, whenever the LIU is connec…

11, National Communications Page 11 ANNOUNCEMENT - INSTALLATION Where an existing ANSWERING MACHINE is NOT being replaced 1. An ANSWERING MACHINE connection port is required to allow the DMS device to ANSWER your After Hours calls. This connection is normally a 610 Style Telephone Socket (…

10, Page 10 National Communications ANNOUNCEMENT - INSTALLATION Where an existing ANSWERING MACHINE is being replaced 1. Disconnect Power to the existing Answering Machine. 2. Remove the Telephone Cable which is connected to the existing Answering Machine, from the socket where it co…

3, PRODUCT DESCRIPTION Our DMS Digital Message Player, is designed to connect to a PABX or other Multi-Line Telephone System to provide : • A High Quality Message On Hold facility. and • A High Quality After Hours Announcement. This means that in addition to a High Quality M…