Limbs & Things 60166 Operation & User’s Manual

14, 14 Connector in the locked position, preventing items from being attached to it Unlock the connector by depressing the metal clip The connector is reset and ready to use when the pin pops out Troubleshooting 1 2 …

1, Basic Catheterisation Trainer limbsandthi ngs.com r me sk train uc t Limbs & Things Ltd. Sussex Street, St Philips Bristol, BS2 0RA, UK [email protected] +44 (0) 117 311 0500 Product No: 60166 Us e …

6, Limbs & Things 60166 6 Fill the 30ml bottle cap with Milton (x2) Any air in the bladder will vent out of the tube into the bag. When the air bubbles stop, the bladder is completely full. Top up the bag to the 1 litre mark to provide realistic fluid pressure. The Trainer is ready to use Dispense 60ml …

8, 8 Insert the syringe into the urethral opening and inject Fill the syringe with water The catheter should be flushed through with water after each training session as the gel can sometimes block the end of the catheter 1 2 Flushing lubricant out At the end of each training session the ureth…

13, 13 To remove • Grasp the Catheterisation Unit and gently pull it out from the pelvic base • The top of the base may need to be lifted slightly to allow for clearance To insert • Gently push the Catheterisation Unit into the base. The Unit may need to be pushed up slightly to clear…