N4L SFRA45 Operation & User’s Manual

16, SFRA45 User Manual 3-5 Communication and Power Panel 12v Power Inlet Ventilation fan LAN RS232 USB USB Port (Memory Stick) Power Button …

55, SFRA45 User Manual 8-12 extend by approximately 50%. This gives the following ranges: range reference nominal full scale wideband selective 1 3mV 3.16mV 5mV 2 10mV 10mV 15mV 3 30mV 31.6mV 50mV 4 100mV 100mV 150mV 5 300mV 316…

48, N4L SFRA45 SFRA45 User Manual 8-5 The graph is normal scaled to +100dB and -22dB, this can be manually set to other values or set to auto-scale. A vertical marker can be placed on the graph to reference a specific frequency. Up to 30 sweeps may be stored in non-volatile memory usi…

34, SFRA45 User Manual 6-3 6.3 Zero Compensation There are 2 levels of zero compensation: Trim out the dc offset in the input amplifier chain. Measure any remaining offset and compensate. The trim of the dc offset in the input amplifier chain can be manually performed wit…

52, SFRA45 User Manual 8-9 Fluid Filled – Has two options – “yes” or “no”. Yes or No depending on whether the test object was fully filled with normal operating fluid during measurement. 8.6 AUX KEY This is for the Auxiliary Port Settings and is for future appli…