Lifescan OneTouch SelectSimple Owner's Manual

14, 10 Testing with a forearm or palm sample The OneTouch® SelectSimple™ Meter lets you obtain a blood sample from your forearm or palm. Getting a drop of blood from these “alternate sites” may be less painful than a fingertip sample.  CAUTION: Do Not test on your forearm …

18, 14 4. Apply the control solution Hold the meter so that the narrow channel at the top edge of the test strip is at a slight angle to the drop of control solution. Touch the channel on the top edge of the test strip to the control solution. Wait for the channel to fill comple…

31, 27 Symbols Cautions and Warnings. Refer to the Owner’s Guide and inserts that came with your system for safety- related information. Direct current Consult instructions for use � Contains sufficient for <n> tests 2 Do not re-use Expiry Date IVD In Vi…

30, 26 Regression Statistics Samples were tested in duplicate on each of three test strip lots. Results indicate that the OneTouch® SelectSimple™ Meter compares well with a laboratory method. Summary of Regression Analysis Number of Subjects Number of Tests Slope Intercept (mg/dL) 100 60…

6, 2 • Whenever you insert a test strip, the meter will display your last result (blood glucose or control solution test) before prompting you to apply blood. If this is the first time using the meter or after installing a new battery, three dashes ( ) will appear instead. •…

9, Lifescan OneTouch SelectSimple 5 6. Insert a test strip to turn the meter on Insert a test strip into the test strip port as shown, with the contact bars facing you and the arrow pointing down. After the start-up test screen, your last result (blood glucose or control solution test) will appear on the d…