Sensit HXG-3 Instruction Manual

10, 17 CALIBRATION continued from page 16 press and holding the (C) button until the display shows AUTOZERO. Prepare the corresponding calibration gas (methane or pentane), regulator and adapter. From the working display access the USER MENU by pressing and holding the (B) button until the top line…

2, CONTENTS Page # 1. Accessories and Parts 2. General Description 2. Specifications 3. Product Features 5. Sensor Type 5. Battery Installation 6. Adjustable Features - Factory Only 7. Operation and Use 10. Calibration Check 11. Menu 16. Calibration 18. Warranty and Repair Policy AC…

8, 13 (Continued on page 14) MENU continued from page 12 option. The SAVE/ZERO button (C) advances to the next item are based on US time and date settings using a 24 hour clock. After adjusting all numbers press and release the POWER/ MUTE button (A) to save the adjustment. Use the SAVE/ZER…

5, 7 (Continued on page 8) CAUTION: Always start any Sensit® HXG-3 in a gas free environment to insure a proper zero. 1. Push and hold the power button (A) until the display illumi- nates. 2. If the display fails to illuminate or BAT LOW is shown on the display replace the batteries. Th…

1, Sensit HXG-3 SENSIT® HXG-3 Combustible Gas Detector INSTRUCTION MANUAL 7-11 UL V4 Approved UL913, For Class 1, Division 1, Groups C & D hazardous locations when used with alkaline batteries. 7WA6 C L A S S I F I E D Read and understand instructions before use. S E N S I T H X G - 3 �…