Selesta RFIDat Instruction Manual

1, Selesta RFIDat Selesta Ingegneria S.p.A. RFIDat ‐ RFIDock/M ‐ RFIDock/S ‐ RFIDock/L ‐ RFIDock/SA ‐ USB/AL are products made in Italy by . Selesta Ingegneria S.p.A. – Via di Francia 28 – 16149 Genoa – Italy Tel: +3…

2, Selesta Ingegneria S.p.A. System components A. RFIDat: hand held terminal able to read in RF (radiofrequency mode) TAGs B. TAG: 125 Khz passive trasponder C. RFIDock/M: RFIDat modular docking station unit (up to 8 slots with 7 additional RFIDock/S) for: •…

3, Selesta Ingegneria S.p.A. Attention: don't expose the RFIDat and RFIDock/M/S/AL products to heat sources, direct solar light, humidity or rain. Avoid immersion in water or other liquids. Don't tamper with pierce or burn the system components. Don't leave the system com…

4, Selesta Ingegneria S.p.A. RFIDat is equipped with a long life and rechargeable Metalhydrated Nickel batteries, an LCD display and a key with LED indicator. RFIDock/x: docking station units RFIDock/M/S and RFIDock/L are the docking station units used to trans…

5, Selesta Ingegneria S.p.A. c) – “ Master” This mode, besides allowing RFIDat to read a TAG (see "Reader" mode), allows the acquisition of the readings performed by other RFIDat’s configured either in "single reading" or in "continuous reading"…

6, Selesta Ingegneria S.p.A. Connecting RFIDock/M and RFIDock/L units to PC These units can be connected to a PC in different modes : 1. To a USB port using the USB/232 adapter cable and external power supply (RFIDock/AL) 2. to a USB port using the adapter cable USB/AL 3. …