Securitron Magnalock M32 Installation And Operating Instructions Manual

14, 14 500 -1 0 42 0, R e v G NOTE 1: In Figure 21, the green and white wires supply electrical connection when the lock is ON and secure. NOTE 2: In Figure 21, the orange and white wires supply electrical connection when the lock OFF or unsecure. Figure 21. Connect…

8, 8 500 -1 0 42 0, R e v G Install the Blind Nuts NOTE: Figure 8, “Blind Nut Components,” Figure 9, “Installing the Blind Nuts,” and Figure 10, “Blind Nut Before and After Collapse,” provide illustration for the steps in this section. Figure 8. Blind Nut Com…

19, 19 500 -1 0 42 0, R e v G 2. Using the value obtained in Step 1, DETERMINE the proper wire gauge and length using Table 3, “ 12 VDC Wire Gauge and Length,” for a 12 VDC system, or Table 4, “24 VDC Wire Gauge and Length,” for a 24 VDC system. Table 3. 12 VDC Wire Ga…

18, 18 500 -1 0 42 0, R e v G CHALLENGE SOLUTION Electronic noise interference with Access Control System CHECK for voltage from Magnalock to door frame; there should be no voltage present. DETERMINING WIRE GAUGE The Magnalock requires adequate voltage and current for pr…

1, Securitron Magnalock M32 1 500 -1 0 42 0, R e v G Magnalock ® Models M32, M62, and M82B Installation and Operating Instructions 10027 S. 51st St. Ste 102 Phoenix, AZ 85044 Tel: 1-800-624-5625 Mon-Fri: 6:00am - 4:00pm PDT securitron.com [email protected] …