Telycam TLC-1000-U3-10 Operation & User’s Manual

17, 16 PELCO-D PROTOCOL Function Byte1 Byte2 Byte3 Byte4 Byte5 Byte6 Byte7 Up 0xFF Address 0x00 0x08 Pan Speed Tilt Speed SUM Down 0xFF Address 0x00 0x10 Pan Speed Tilt Speed SUM Left 0xFF Address 0x00 0x04 Pan Speed Tilt Speed …

20, 19 FOCUS LIMIT The target distance: 1.5M/2M/3M/6M/10M 1.5M D_ZOOM Digital Zoom: OFF/ON OFF ZOOM SPEED Set zoom speed level:0~7 7 LENS INIT Lens focus parameter frequency setting, choose EXE to start the lens focus reset OFF DIS ZOOM RATIO Disp…

8, Telycam TLC-1000-U3-10 7 IR REMOTE CONTROLLER LED Function Instruction Press any button and shows in red color: Current selection is to control the camera; Press any button and shows in green color: Current selection is to control the codec; Press any button and shows in blue color: Current selec…

6, 5 PRODUCT HIGHLIGHTS Smart and fashion design, ideal for cloud-based conferencing Adopts advanced DSP，1/2.8 inch 5MP image sensor, and high quality 10X 62.5degree FOV optical lens, provides fluent and crystal image quality Fast switching between different video formats: less…

11, 10 VISCA PROTOCOL Part1 Camera Return Command Ack/Completion Message Command Packet Note ACK z0 41 FF Returned when the command is accepted. Completion z0 51 FF Returned when the command has been executed. z = camera adderss+8 Error Messages Command Pa…

14, 13 Command Function Command Packet Note Pan_tiltDrive Up 8x 01 06 01 VV WW 03 01 FF VV: Pan speed 0x01 (low speed) to 0x18 (high speed) WW: Tilt speed 0x01 (low speed) to 0x14 (high speed) YYYY: Pan Position(TBD) ZZZZ: Tilt Position(TBD) Down 8x 01 06…