Micrel KSZ8862-16MQL Manual 

7, Micrel, Inc. KSZ8862-16/32MQL August 2010 7 M9999-081310-3.1 Bank 44 Digital Testing Control Register (0x04): DTCR ..........................................................................................................80 Bank 44 Analog Testing Control Regist…

119, Micrel, Inc. KSZ8862-16/32MQL August 2010 119 M9999-081310-3.1 EEPROM Timing EESK EECS EEDI EEDO High-Z D15 D14 D13 D1 D0 An A0011 1 *1 *1 Start bit tcyc ts th Figure 22. EEPROM Read Cycle Timing Diagram Timing Parameter Description Min Typ Max Unit …

80, Micrel, Inc. KSZ8862-16/32MQL August 2010 80 M9999-081310-3.1 Bank 44 Digital Testing Status Register (0x00): DTSR This register contains the user defined register for the switch function. Bit Default R/W Description 15-3 0x0000 RO Reserved 2-0 0x0 RO Reserv…

94, Micrel, Inc. KSZ8862-16/32MQL August 2010 94 M9999-081310-3.1 Bit Default R/W Description 0110 = 2Mbps 0111 = 4Mbps 1000 = 8Mbps 1001 = 16Mbps 1010 = 32Mbps 1011 = 48Mbps 1100 = 64 Mbps 1101 = 72Mbps 1110 = 80Mbps 1111 = 88Mbps Notes: For 10BT, rate settings ab…

122, Micrel KSZ8862-16MQL Micrel, Inc. KSZ8862-16/32MQL August 2010 122 M9999-081310-3.1 Selection of Isolation Transformers A 1:1 isolation transformer is required at the line interface. An isolation transformer with integrated common-mode choke is recommended to exceed FCC requirements. …

103, Micrel, Inc. KSZ8862-16/32MQL August 2010 103 M9999-081310-3.1 MIB (Management Information Base) Counters The KSZ8862M provides 34 MIB counters for each port. These counters are used to monitor the port activity for network management. The MIB counters are formatted …